| Manufacturer | MultiWeigh |
|---|---|
| Model | HDW 20-40-60 TWIN |
| Year | 2012 |
| Condition | Used |
| Machine type | Multihead weigher, TWIN configuration |
| Number of weigh hoppers | 20 |
| Weighing range | 230 - 5,000 grams |
| Scale interval | 5 g (dw) / 10 g (d), accuracy class X1 |
| Product | Frozen meat, 0 to -15 °C |
| Controls | IPC611-W1200 with colour touchscreen |
| Construction | Stainless steel, dimpled contact parts, IP65 |
| Connection | 400 V, 50 Hz; compressed air 6 bar |
20-head multihead weigher in TWIN configuration, built for frozen meat
The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval.
The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product.
New
Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars […]
New
Closes bags with a strip of tape around the neck The SBS FlexSeal closes bags, for example of bread, vegetables or fruit, by applying a strip of tape around the twisted neck. You hold the bag against the brushes, which draw in and twist the neck; the machine then wraps a piece of tape around […]
New
Chamber belt vacuum packaging machine for automatic bag packing This CL-C 950 is a chamber belt vacuum packaging machine built by Webomatic, a German manufacturer that has been producing vacuum packaging equipment since 1958. It is positioned as the entry-level model within the WEBOMATIC CleanDesign range and features the patented Roll-Back-Lid, which allows the inside […]
New
Platform scale up to 30 kg, reading in 10 g steps This stainless steel platform scale weighs from 0.2 to 30 kg with a division of 0.01 kg. The weighing platform sits freely on the table, while the indicator is mounted on a stainless column at eye level. Useful for weighing portions, crates or ingredients. […]
New
Cuts fillets into portions by weight The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left […]
New
Labelling line with two print and apply stations This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control. The control […]
New
Loma IQ3 metal detector with conveyor, built in 2022. Aperture 350 × 100 mm, 300 mm belt.
New
X-ray inspection of packed products The Eagle Pack 240 PRO uses X-ray to check packed products for foreign bodies such as metal, glass and stone. The product runs on the belt through the shielded tunnel. Rejected products go via the reject unit into a separate bin behind a door. The control cabinet has its own […]
For every weighment a multihead weigher picks the combination of hoppers that comes closest to the target weight. With twenty hoppers the controller has plenty of combinations to choose from, and in TWIN mode the machine splits them over two outlets. One weigher then feeds two packaging machines or two lanes.
For large portions you run all twenty hoppers to a single outlet. That makes the machine suitable for small retail packs as well as foodservice portions of up to 5 kilos.
Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer.
Jan-Willem is our man for multihead weighers. He knows the build, the controls and the pitfalls, and will help you decide which configuration suits your product.
Interested in this machine?
2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers
Request infoNeed maintenance or repair? View our service
Sell your machine
Send us a few pictures of the machine and its data plate. We will tell you what we can do with it.
Send photos on WhatsApp Rather use a form? Upload them hereYour enquiry
or leave your details