Not found what you need?
Our stock changes every week and a lot of machines are sold before they reach the website. Tell us what you are looking for and we will come back to you as soon as we have it — or as soon as we can source it.
Pre-owned machines
Pre-owned machines, prepared the way you want them
At STC we believe a good machine has years of life left in it, provided it gets the right attention. Not every machine in our stock has been overhauled in advance. You tell us how you want to receive it — from a technical check to a full overhaul in our own workshop, stripped down, inspected, rebuilt and tested — and we agree the work with you.
That way you get the reliability of a proven machine at a fair price, and you only pay for the work your machine actually needs.
Popular searches:
35 machines found
New
Marel IPM3 X300 portion cutter
Cuts fillets into portions by weight The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left […]
New
Tilting mixing kettle
Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from […]
New
Hepro HSM-180/SAP asparagus peeler
Asparagus peeling machine with eight stations The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table. The rating plate shows it was built […]
New
Serrano MH-640 automatic double clipper
Closes sausages and mortadella with a clip on both ends The Serrano MH-640 is an automatic double clipping machine, originally designed for mortadella and other large sausage calibres. The filled casing is voided and clipped on two sides in one stroke, so one sausage is closed and the next already has its start. The machine […]
New
Alup OWS 18 oil-water separator
Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, […]
New
Leventi Combimat DGT combi steamer
Convection oven and steamer in one, with stand The Leventi Combimat DGT is a combi steamer that cooks with steam, hot air or a combination of both. That lets you prepare meat, fish, vegetables and bakery products in a single unit, from gentle steaming to crisp baking. The oven sits on a stainless stand with […]
New
2011 Fomaco FGM 48F brine injector for poultry and fish
Fomaco needle injector with 48 needles for chicken, poultry and fish The Fomaco FGM 48F is a brine injector from the Danish specialist Fomaco (Food Machinery Company). With 48 needles it injects brine or marinade evenly into chicken, poultry and fish: more flavour, a more tender product and a consistent weight per piece. The product […]
New
Vegetable spin dryer
Spin dryer for washed vegetables This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side. Spin time is set with the timer switch on the base. There is no manufacturer […]
New
Parema mixing tank with agitator
Stainless steel mixing tank for dressings and sauces This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors. Agitator speed is set steplessly with the dial on […]
New
Zummo automatic orange juicer
Orange juicer with automatic fruit feed This automatic juicer from Zummo takes the oranges from the basket on top, cuts them in half and squeezes them between two cups. The juice runs out through the tap into your jug or bottle, and the peels drop into the bins in the base cabinet. Suited to fresh […]
Kroma Gutmaster 1200 Fish Gutting Machine
The Kroma Gutmaster 1200 is a powerful fish gutting machine for fast, accurate processing of various fish species. Ideal for fish processors with high capacity demands.
2019 Feltracon 61M Melon Peeling Machine
The Feltracon 61M is an industrial melon peeler for fast, efficient handling of whole melons in fruit processing lines.
Winterhalter GM 85 Vegetable Washing Machine
The Winterhalter GM 85 washes vegetables quickly and hygienically in professional kitchens and food processing environments. Efficient, easy to use and suited to large volumes.
2021 Verbruggen Satay Skewering Machine
The Verbruggen satay skewering machine threads products onto skewers quickly and automatically. Ideal for efficient production with a hand-made look.
New
2021 Eillert MSD-500 VAR
Vegetable centrifuge This Eillert MSD-500 VAR spin dryer removes water from washed vegetables and leafy products. The VAR version has a variable speed drive, so the spinning speed can be matched to the product. The machine is built in stainless steel, has a digital control panel and comes with several centrifuge baskets. It has seen […]
New
2014 Marel MS2730 Filleting Machine
Automatic salmon filleting machine with Back Bone Trim The Marel MS2730 is an automatic salmon filleting machine equipped with a Back Bone Trim system. It adjusts automatically to varying fish sizes and is built in stainless steel for hygienic use. The machine has been maintained by Marel on an annual basis and had a complete […]
New
Eillert Double Wash 20
Eillert Double Wash 20: double washing line for leafy and cut vegetables, with two wash tanks, air agitation and a dewatering roller.
Holac Dicer
Holac VA industrial dicer for precise cutting of meat, cheese, vegetables and plant-based products. Sturdy stainless steel machine with high capacity, fully working and ready for production.
New
Marel IPM3 X300 portiesnijder
Snijdt filets in porties op gewicht De Marel IPM3 X300 is een portiesnijder voor vis-, kip- en vleesfilets. Elk stuk wordt op de band gescand, waarna de machine berekent waar het mes moet snijden om porties met een vast gewicht of een vaste lengte te krijgen. Zo haalt u meer uit elke filet en blijft […]
New
Kantelbare mengketel
Mengketel die kantelt om te legen In deze roestvaststalen ketel mengt u sauzen, salades, vullingen of andere producten. De deksel wordt pneumatisch vergrendeld, zodat er tijdens het mengen niets uit kan. Na het mengen kantelt de ketel in het frame, zodat u hem makkelijk leegt in een bak of op een band. De machine wordt […]
New
Hepro HSM-180/SAP aspergeschilmachine
Schilmachine voor asperges met acht stations De Hepro Schäl-Automat HSM-180/SAP schilt asperges automatisch. De asperges worden ingelegd en langs de schilkoppen gevoerd, die de schil gelijkmatig verwijderen. De machine heeft acht stations die u per stuk aan of uit zet; de geschilde asperges komen er aan de zijkant op het aflegblad uit. Volgens het typeplaatje […]
New
Serrano MH-640 automatische dubbele clipper
Sluit worsten en mortadella aan beide kanten met een clip De Serrano MH-640 is een automatische dubbele clipmachine, oorspronkelijk bedoeld voor mortadella en andere grote worstkalibers. Het gevulde darmstuk wordt ingesnoerd en in één beweging aan twee kanten geclipt, zodat de ene worst dicht is en de volgende direct een begin heeft. De machine staat […]
New
Alup OWS 18 olie-waterscheider
Scheidt olie uit het condensaat van uw compressor De Alup OWS 18 vangt het condensaat op dat uit een schroefcompressor, droger of ketel komt en haalt de olie eruit. Het water dat overblijft mag daarna meestal gewoon het riool in, zodat u geen olieachtig condensaat hoeft af te laten voeren. De scheider is gebouwd in […]
New
Leventi Combimat DGT combisteamer
Heteluchtoven en stoomoven in één, met onderstel De Leventi Combimat DGT is een combisteamer die kan garen met stoom, hete lucht of een combinatie van beide. Daarmee kunt u vlees, vis, groente en bakproducten in één apparaat bereiden, van zacht stomen tot krokant afbakken. De oven staat op een RVS-onderstel met inschuifrails voor bakken en […]
New
Groentecentrifuge
Centrifuge om gewassen groente droog te slingeren In deze centrifuge slingert u gewassen sla, groente of kruiden droog. De groente gaat in de uitneembare blauwe korf, de deksel gaat dicht en de machine draait het water eruit. Het water loopt weg via de afvoer aan de zijkant. De draaitijd stelt u in met de tijdschakelaar […]
New
Parema mengtank met roerwerk
Roestvaststalen mengtank voor dressings en sauzen Deze mengtank heeft een roerwerk van Parema Procestechniek (type PAR5L-25, bouwjaar 2006) en werd gebruikt als dressingmenger. De tank heeft een scharnierende deksel, een kegelvormige bodem met aftap en staat op poten met wielen. Het toerental van het roerwerk regelt u traploos met de draaiknop op de schakelkast; daarachter […]
New
Zummo automatische sinaasappelpers
Sinaasappelpers die zelf de vruchten aanvoert Deze automatische pers van Zummo haalt de sinaasappels uit de korf bovenop, snijdt ze doormidden en perst ze uit tussen twee kommen. Het sap loopt via de kraan in uw kan of fles, de schillen vallen in de bakken in de onderkast. Handig voor vers sap in een keuken, […]
New
Zanussi cooking kettle
Stainless steel cooking kettle by Zanussi This Zanussi cooking kettle is a jacketed kettle on legs, built entirely in stainless steel. The lid is hinged and has a handle with a catch. A draw-off tap at the front lets you empty the kettle without tilting it. The control panel has a thermostat knob, a second […]
New
Pneumatic cabbage corer
Cabbage corer on a stainless steel stand This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath. The machine is built entirely in stainless steel and stands on […]
New
2022 Niro-tech RX-150 Paddle Mixer
150-litre single-shaft paddle mixer The Niro-tech RX-150 is a stainless steel paddle mixer with a single mixing shaft that mixes in both directions. The tank holds 150 litres, enough for around 110 kg of meat. A 1.5 kW motor drives the shaft at 5 to 48 rpm, and the machine is operated from a moisture-proof […]
New
Urschel cutting machine
Used Urschel cutting machine, built entirely in stainless steel This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the […]
New
Eillert Washer for Sinking Products
Washer for products that sink This Eillert washer is designed for products that sink in water. The product enters a long stainless steel trough via an infeed belt with hopper, where rotating paddles move it through the water. A sieve belt carries the washed product out again. The trough has a lid that opens, and […]
New
Sormac USM-100
Onion peeling machine for professional vegetable processing This USM-100 is an onion peeler built by Sormac in Venlo, manufactured in 2006 and finished in stainless steel. The machine has an infeed hopper, a transport chain with carrying pockets and a 5 kW drive running on 230/400 V, 50 Hz. Inside the housing sits the rotating […]
New
Maurer 2-Trolley Cooking and Steaming Chamber
Cooking and steaming chamber for two trolleys This stainless steel Maurer chamber takes two trolleys at a time and is used for cooking and steaming products. The control panel sets the cabinet temperature, the core temperature via the product probe and the cooking time, with separate switches for the fan, the heating and smoke. Two […]
- Sold
2012 Treif Falcon Hybrid Fixed-Weight Portioning Machine
The TREIF Falcon Hybrid is an accurate portion slicer for meat processing, including infeed weigher and checkweigher. Ideal for fast, efficient production.
See all our projects
At STC we do not just supply single machines, we build complete production lines.
See the solutions we have built for all kinds of customers. From automatic weighing and packaging lines to complete processing lines for fish, meat and vegetables. Every project is different, but the result is always the same: a line that works.
